Joint Strength Optimization and Damping Assessment of NiTi-Polymer Matrix Hybrid Composites

[摘要] Approaches to optimize the adhesive joint strength between shape memory alloy ribbons and carbon fiber-reinforced epoxy composites were investigated for potential use as either an actuating structure or a dampening composite for structural applications. The interfacial bond strength between nickel-titanium (NiTi) and a polymer matrix composite (PMC) was measured by double lap shear testing as a function of NiTi surface treatment and adhesive material. The effect of NiTi surface treatment on damping was investigated using dynamic mechanical analysis. Lap shear data show that treating the surfaces of NiTi ribbons by light sandblasting and primer application increased the interfacial bond strength by 20 percent over the baseline composite structure. Lap shear data also reveal that out of three different film adhesives investigated, samples bonded with AF 191U and Hysol® 9696U display the highest adhesive joint strengths. Optical microscopy reveals that most samples failed by either cohesive failure within the adhesive or by adhesive failure at either the adhesive/PMC or NiTi/adhesive interface. Adhering NiTi to the PMC did not appear to negatively impact damping performance; however, a more thorough examination into NiTi's role on vibration damping should be investigated.

[发布日期] 2018-08-01

[学科分类] 复合材料

[关键词] JOINTS (JUNCTIONS);MECHANICAL PROPERTIES;NITINOL ALLOYS;POLYMER MATRIX COMPOSITES;DAMPING;OPTICAL MICROSCOPES;ADHESIVE BONDING;SHAPE MEMORY ALLOYS