CFD Simulations of the IHF Arc-Jet Flow: 9-Inch Nozzle, Flow Surveys, LEAF Wedge Calibration Data

[摘要] This paper reports computational analyses and flow characterization studies in a high enthalpy arc-jet facility at NASA Ames Research Center. These tests were conducted using a wedge model placed in a free jet downstream of new 9-inch diameter conical nozzle in the Ames 60-MW Interaction Heating Facility. Both the nozzle and wedge model were specifically designed for testing in the new Laser-Enhanced Arc-jet Facility. Data were obtained using stagnation calorimeters and wedge models placed downstream of the nozzle exit. Two instrumented wedge calibration plates were used: one water-cooled and the other RCG-coated tile plate. Experimental surveys of arc-jet test flow with pitot and heat flux probes were also performed at three arc-heater conditions, providing assessment of the flow uniformity and valuable data for the flow characterization. The present analysis comprises computational fluid dynamics simulations of the nonequilibrium flowfield in the facility nozzle and test box, including the models tested, and comparisons with the experimental measurements. By taking into account nonuniform total enthalpy and mass flux profiles at the nozzle inlet as well as the expansion waves emanating from the nozzle exit and their effects on the model flowfields, these simulations approximately reproduce the probe survey data and predict the wedge model surface pressure and heat flux measurements.

[发布日期] 2019-06-17

[学科分类] 力学，机械学

[关键词] AEROTHERMODYNAMICS;ANALYSIS (MATHEMATICS);ARC DISCHARGES;ARC HEATING;CALIBRATING;CHARACTERIZATION;COMPUTATIONAL FLUID DYNAMICS;CONICAL NOZZLES;CONVERGENT-DIVERGENT NOZZLES;ENTHALPY;FLOW DISTRIBUTION;HEAT FLUX;HEATING EQUIPMENT;HYPERSONIC FLOW;LASER HEATING;NAVIER-STOKES EQUATION;PRESSURE MEASUREMENT;TEMPERATURE EFFECTS;THERMAL PROTECTION;WEDGES