SECOND STATUS REPORT: TESTING OF AGED SOFTWOOD FIBERBOARD MATERIAL FOR THE 9975 SHIPPING PACKAGE

[摘要] Samples have been prepared from a softwood fiberboard lower subassembly. Physical, mechanical and thermal properties have been measured following varying periods of conditioning in each of several environments. These tests have been conducted in the same manner as previous testing on cane fiberboard samples. Overall, similar aging trends are observed for softwood and cane fiberboard samples, with a few differences. On the positive side, the softwood fiberboard data to date shows less sample-to-sample variation in physical properties than cane fiberboard, and the thermal conductivity decreases at a slower rate at 250F for softwood fiberboard than for cane fiberboard. On the other hand, the softwood fiberboard physical property samples generally show degradation rates greater than cane fiberboard samples in the 185F 30%RH environment. Testing following additional conditioning will continue and the addition of samples in other elevated humidity environment(s) will be pursued to identify the extent of these trends. Post-conditioning data have been measured on samples from a single softwood fiberboard assembly, and baseline data are also available from a limited number of vendor-provided samples. This provides minimal information on the possible sample-to-sample variation exhibited by softwood fiberboard. Data to date are generally consistent with the range seen in cane fiberboard, but some portions of the data trends are skewed toward the lower end of that range. Further understanding of the variability of softwood fiberboard properties will require testing of additional material.

[发布日期] 2010-12-27 [发布机构] Savannah River Site (S.C.)

[关键词] Aging;Testing;Thermal Conductivity;36 Materials Science;Mechanical Properties