Process simulation of impurity impacts on CO2 fluids flowing in pipelines

[摘要] Captured carbon dioxide flowing in pipelines is impure. The impurities contained in the carbon dioxide fluid impact on the properties of the fluid. The impact of each impurity has not been adequately studied and fully understood. In this study, binary mixtures containing carbon dioxide and one impurity, at the maximum permitted concentration, flowing in pipelines are studied to understand their impact on pipeline performance. A hypothetical 70 km uninsulated pipeline is assumed and simulated using Aspen HYSYS (v.10) and gPROMS (v.5.1.1). The mass flow rate is 2,200,600 kg/h; the internal and external diameters are 0.711 m and 0.785 m. 15 MPa and 9 MPa were assumed as inlet and minimum pressures and 33 degrees C as the inlet temperature, to ensure that the fluid remain in the dense (subcritical or supercritical) phase. Each binary fluid is studied at the maximum allowable concentration and deviations from pure carbon dioxide at the same conditions is determined. These deviations were graded to rank the impurities in order of the degree of impact on each parameter. All impurities had at least one negative impact on carbon dioxide fluid flow. Nitrogen with the highest concentration (10-mol %) had the worst impact on pressure loss (in horizontal pipeline), density, and critical pressure. Hydrogen sulphide (with 1.5-mol %) had the least impact, hardly changing the thermodynamic properties of pure carbon dioxide. (C) 2019 Elsevier Ltd. All rights reserved.

[发布日期] 2019-12-10

[关键词] CO2 impurities;CO2 pipelines;Impact of impurities;CO2 pressure drop;CO2 phase envelope;Binary CO2 fluids