New synthesis strategies to improve Co-Free LiNi0.5Mn0.5O2 cathodes: Early transition metal d0 dopants and manganese pyrophosphate coating

[摘要] In this work, we report solution-based doping and coating strategies to improve the electrochemical performance of the Co-free layered oxide cathode LiNi0.5Mn0.5O2 (NM-50/50). Small amounts of d(0) dopants (e.g., Mo(6+)and Ti4+, 0.5-1 at. %) increase the cathode's specific capacity, cycling stability, and rate capability. For example, a Mo-doped cathode with the nominal composition LiNi0.495Mn0.495Mo0.01O2 exhibits a high reversible capacity of 180 mA h/g at 20 mA/g compared to only 156 mA h/g for undoped NM-50/50. Effects of 1 at.% Mo dopant on the cathode structure were studied using a suite of characterization tools including X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Xray absorption spectroscopy. These measurements demonstrate that Mo6+ dopant is enriched near the particle surface and improves the electrochemical performance of LiNi0.5Mn0.5O2 by: (i) reducing Li+/Ni2+ cation mixing which facilitates Li+ transport, (ii) mitigating undesirable phase transformations near the cathode surface, and (iii) altering the cathode/electrolyte interfacial chemistry. This work also reports the use of an inorganic Mn2P2O7 coating which enhances the cycling stability of Mo-doped NM-50/50, presumably through formation of a stable cathode electrolyte interphase (CEI) layer. Overall, the synthesis approaches reported herein are quite general and can potentially be expanded to other high voltage Li-ion battery cathodes.

[发布日期] 2020-12-15

[关键词] Co-free cathodes;d(0) cation;Pyrophosphate coating;Cation mixing;Layered oxide cathodes