Effect of Cu doping on the microstructure and mechanical properties of AlTiVN-Cu nanocomposite coatings

[摘要] Cu phase has been incorporated into hard coatings to form nanocomposite structure, which not only enhanced the hardness but also the toughness due to excellent ductility of copper. In this study, a single Al67Ti33-V-Cu spliced target was used to prepare the AlTiVN-Cu nanocomposite coatings, and the effect of Cu doping on microstructure and mechanical properties of AlTiVN-Cu coatings has been investigated. The results showed that the deposition rate linearly increased from 3.8 to 13.4 nm/min when Cu content increased from 2.6 to 46.7 at.%. AlTiVN-Cu coatings exhibited a Ti-Al-V-N solid-solution phase with strong (111) preferred orientation at low Cu contents below 8.3 at.%. When Cu content increased above 22.6 at.%, Cu atoms grew up into metallic crystallites and strongly suppressed crystal growth of nitride coatings due to repeated nucleation. With increasing Cu content, the microstructure transferred from compact columnar to dense featureless, and then to coarse columnar structure. AlTiVN-Cu(2.6 at.%) coating exhibited a super hardness of 41.1 GPa and an excellent toughness with a high H-3/E*(2) ratio of 0.24.

[发布日期] 2020-11-25

[关键词] AlTiVN-Cu;Microstructure;Mechanical properties;Toughness