Fabric cutting application of FeAl-based alloys

[摘要] Four intermetallic-based alloys were evaluated for cutting blade applications. These alloys included Fe3Al-based (FAS-II and FA-129), FeAl-based (PM-60) and Ni3Al-based (IC-50). These alloys were of interest because of their much higher work-hardening rates than the conventionally used carbon and stainless steels. The FeAl-based PM-60 alloy was of further interest because of its hardening possibility through retention of vacancies. The vacancy retention treatment is much simpler than the heat treatments used for hardening of steel blades. Blades of four intermetallic alloys and commercially used M2 tool steel blades were evaluated under identical conditions to cut two-ply heavy paper. Comparative results under identical conditions revealed that the FeAl-based alloy PM-60 outperformed the other intermetallic alloys and was equal to or somewhat better than the commercially used M2 tool steel. (C) Elsevier Science B.V. All rights reserved.

[发布日期] 1998-12-31

[效力级别]  Proceedings Paper

[关键词] iron aluminide;FeAl;cutting;fabric;iron aluminides;nickel aluminides