Effects of impregnation combined heat treatment on the pyrolysis behavior of poplar wood

[摘要] To investigate the effects of urea-formaldehyde (UF) resin impregnation combined heat treatment (IMPG-HT) on the pyrolysis behavior of poplar wood, the chemical composition, pyrolysis characteristics, pyrolysis kinetics, and gaseous products released during pyrolysis of untreated (control), IMPG-HT, IMPG and HT woods were analyzed. The results demonstrate that IMPG-HT changes pyrolysis behavior of poplar wood significantly. Unlike the control and HT samples, the thermogravimetric / derivative thermogravimetric (TG/DTG) curves of IMPG wood shift toward lower temperature, and the shoulder on DTG curves weaken or even disappear. The maximum mass loss rate of IMPG-HT samples decreases, and carbon residual yield increases to 23% or more and activation energy ( E ) increases sharply after conversion rate ( α ) reaching 0.80. HT improves the thermal stability of IMPG wood, which is represented by the increase of decomposition temperature ( T d ) and DTG peak temperature ( T peak ) and the higher E value of IMPG-HT wood. For the pyrolysis gaseous products, IMPG-HT wood produces nitrogen-containing gases (HNCO and NH 3 ) due to the presence of UF resin, but the amounts of these gases are less than that produced by IMPG wood because the heat treatment had removed part of N elements.

[学科分类] 急救医学