The Impact of Energy Dissipation Devices on the Size of Local Scour Beds on the Sluice Gate Model

[摘要] The article presents the results of experimental research aimed at recognizing the impact of the design of energy dissipation devices on the formation of bed local scouring below the sluice gate. The experiments were carried out on a model of a sluice gate built in a rectangular flume with a width of 0.58 m, with the outflow of the stream from under the slider to a horizontal bed 0.80 m long. Behind the dam gate valve three different constructions of energy dissipation devices were used: flat, horizontal slab, slab equipped with baffle blocks arranged in two rows and rip-rap. The experiments assumed forming a scour hole in 480 minutes downstream the sluice, where the bed was filled with sorted sand. The depths of the scour were measured in the longitudinal profile after 30, 60, 90, 120, 180, 240, 300, 360, 420 and 480 minutes. The deepest scour holes of the bed, both in terms of depth and length, occurred on the structure model with energy dissipation devices made as a flat, horizontal plate. At the same time, in this case, the hole was developing the most rapidly, and its shape and size posed the greatest threat to the stability of the structure. The use of baffle blocks arranged in two rows or a rip-rap behind the structure slide noticeably reduced the size of the scour and delayed the erosion of the bottom in time, as compared to the course of this process on a model with a flat, horizontal slab.

[学科分类] 建筑学

[关键词] local scouring;hydraulic model studies;energy dissipation devices;sluice gate