Use of 3-dimensional printing at the point-of-care to manage a complex wound in hemifacial necrotizing fasciitis: a case report

[摘要] BackgroundComplex facial wounds can be difficult to stabilize due to proximity of vital structures. We present a case in which a patient-specific wound splint was manufactured using computer assisted design and three-dimensional printing at the point-of-care to allow for wound stabilization in the setting of hemifacial necrotizing fasciitis. We also describe the process and implementation of the United States Food and Drug Administration Expanded Access for Medical Devices Emergency Use mechanism.Case presentationA 58-year-old female presented with necrotizing fasciitis of the neck and hemiface. After multiple debridements, she remained critically ill with poor vascularity of tissue in the wound bed and no evidence of healthy granulation tissue and concern for additional breakdown towards the right orbit, mediastinum, and pretracheal soft tissues, precluding tracheostomy placement despite prolonged intubation. A negative pressure wound vacuum was considered for improved healing, but proximity to the eye raised concern for vision loss due to traction injury. As a solution, under the Food and Drug Administration’s Expanded Access for Medical Devices Emergency Use mechanism, we designed a three-dimensional printed, patient-specific silicone wound splint from a CT scan, allowing the wound vacuum to be secured to the splint rather than the eyelid.After 5 days of splint-assisted vacuum therapy, the wound bed stabilized with no residual purulence and developed healthy granulation tissue, without injury to the eye or lower lid. With continued vacuum therapy, the wound contracted to allow for safe tracheostomy placement, ventilator liberation, oral intake, and hemifacial reconstruction with a myofascial pectoralis muscle flap and a paramedian forehead flap 1 month later. She was eventually decannulated and at six-month follow-up has excellent wound healing and periorbital function.ConclusionsPatient-specific, three-dimensional printing is an innovative solution that can facilitate safe placement of negative pressure wound therapy adjacent to delicate structures. This report also demonstrates feasibility of point-of-care manufacturing of customized devices for optimizing complex wound management in the head and neck, and describes successful use of the United States Food and Drug Administration’s Expanded Access for Medical Devices Emergency Use mechanism.

[发布日期] 2022-12-31

[关键词] Three-dimensional printing (3D);Negative pressure wound therapy;Wound Vac;Computer assisted design;Necrotizing fasciitis;Case report;Expanded access for medical devices emergency use mechanism;Point of care