Topical Report Tantalum – 2.5% Tungsten Machinability Testing

[摘要] Protection Association (NFPA). NFPA 484, Standard for Combustible Metals, Chapter 9 Tantalum and Annex E, supplemental Information on Tantalum require cutting oil be used when machining tantalum because it burns at such a high temperature that it breaks down the water in a water-based metalworking fluid (MWF). The NFPA guide devotes approximately 20 pages to this material. The Kansas City Plant (KCP) uses Fuchs Lubricants Ecocut Base 44 LVC as a MWF. This is a highly chlorinated oil with a high flash point (above 200° F). The chlorine is very helpful in preventing BUE (Built Up Edge) that occurs frequently with this very gummy material. The Ecocut is really a MWF additive that Fuchs uses to add chlorinated fats to other non-chlorinated MWF.

[发布日期] 2009-09-02

[学科分类] 材料科学（综合）

[关键词] TANTALUM BASE ALLOYS;TUNGSTEN ALLOYS;MACHINING;LUBRICATING OILS;KANSAS CITY PLANT