Feasibility of Close-Range Photogrammetric Models for Geographic Information System

[摘要] The objective of this project was to determine the feasibility of using close-range architectural photogrammetry as an alternative three dimensional modeling technique in order to place the digital models in a geographic information system (GIS) at SLAC. With the available equipment and Australis photogrammetry software, the creation of full and accurate models of an example building, Building 281 on SLAC campus, was attempted. After conducting several equipment tests to determine the precision achievable, a complete photogrammetric survey was attempted. The dimensions of the resulting models were then compared against the true dimensions of the building. A complete building model was not evidenced to be obtainable using the current equipment and software. This failure was likely attributable to the limits of the software rather than the precision of the physical equipment. However, partial models of the building were shown to be accurate and determined to still be usable in a GIS. With further development of the photogrammetric software and survey procedure, the desired generation of a complete three dimensional model is likely still feasible.

[发布日期] 2011-06-22

[学科分类] 核物理和高能物理

[关键词] ACCURACY;DIMENSIONS;GEOGRAPHIC INFORMATION SYSTEMS;SIMULATION;STANFORD LINEAR ACCELERATOR CENTER Other;Other