Characteristics of Reduction Gear in Electric Agricultural Vehicle

[摘要] In electric agricultural machine a reduction gear is needed to convert the high speed rotation motion generated by DC motor to lower speed rotation motion used by the vehicle. The reduction gear consists of several spur gears. Spur gears are the most easily visualized gears that transmit motion between two parallel shafts and easy to produce. The modelling and simulation of spur gears in DC motor reduction gear is important to predict the actual motion behaviour. A pair of spur gear tooth in action is generally subjected to two types of cyclic stress: contact stress and bending stress. The stress may not attain their maximum values at the same point of contact fatigue. These types of failure can be minimized by analysis of the problem during the design stage and creating proper tooth surface profile with proper manufacturing methods. To improve its life expectation in this study modal and stress analysis of reduction gear is simulated using ANSYS workbench based on finite element method (FEM). The modal analysis was done to understand reduction gear deformation behaviour when vibration occurs. FEM static stress analysis is also simulated on reduction gear to simulate the gear teeth bending stress and contact stress behaviour.

[发布机构] Department of Bio-industrial Machinery Engineering, Pusan National University, 1268-50, Samnangjin-ro, Samnangjin-eup, Miryang, Korea, Republic of^1;Life and Industry Convergence Research Institute, Pusan National University, 1268-50, Samnangjin-ro, Samnangjin-eup, Miryang, Korea, Republic of^2;Keunwoo Tech Co. Ltd, 82-6, Geomdangongdan-ro, Buk-gu, Daegu, Korea, Republic of^3

[效力级别] 材料科学

[关键词] Agricultural machine;Agricultural vehicles;Ansys workbenches;Deformation behaviour;High speed rotation;Manufacturing methods;Modelling and simulations;Static stress analysis