Weldability of AA 5052 H32 aluminium alloy by TIG welding and FSW process _ A comparative study

[摘要] Aluminium 5xxx series alloys are the strongest non-heat treatable aluminium alloy. Its application found in automotive components and body structures due to its good formability, good strength, high corrosion resistance, and weight savings. In the present work, the influence of Tungsten Inert Gas (TIG) welding parameters on the quality of weld on AA 5052 H32 aluminium alloy plates were analyzed and the mechanical characterization of the joint so produced was compared with Friction stir (FS) welded joint. The selected input variable parameters are welding current and inert gas flow rate. Other parameters such as welding speed and arc voltage were kept constant throughout the study, based on the response from several trial runs conducted. The quality of the weld is measured in terms of ultimate tensile strength. A double side V-butt joints were fabricated by double pass on one side to ensure maximum strength of TIG welded joints. Macro and microstructural examination were conducted for both welding process.

[发布机构] Department of Mechanical Engineering, Noorul Islam University, Tamil Nadu, India^1;Noorul Islam University, Tamil Nadu, India^2

[学科分类] 航空航天科学

[关键词] 5052-H32 aluminium alloy;Automotive component;Comparative studies;Mechanical characterizations;Microstructural examination;TIG-welding;Tungsten inert gas welding;Ultimate tensile strength