Experimental Investigation of Temperature Distribution along the Length of Uniform Area Fin for Forced and Free Convection

[摘要] The overheating of an industrial component sometimes may leads to system failure. The convection heat transfer from a heated surface can be effectively enhanced by employing fins on that surface. This Paper emphasizes on the experimental investigation of temperature distribution along the length of pin shaped fin. The analysis is performed on a 100 mm long fin made up of brass with 19.6 mm diameter having thermal conductivity as 111 W/m.K. Temperature at different section of the fin along its length is evaluated experimentally and theoretically. The influence of convection mode viz natural & forced convection and variable heat input on the temperature distribution is evaluated. The result outcomes are then compared with the widely accepted analytical relations. A comparison of convective heat transfer coefficient for uniform and non-uniform area fin is also presented. The results by experimental and analytical method are found to be in good agreement for free convection phenomenon.

[发布机构] Department of Mechanical Engineering, SGT University, Gurgaon; 122505, India^1

[效力级别] 机械制造

[关键词] Analytical method;Analytical relations;Convection modes;Convection phenomena;Convective heat transfer Coefficient;Experimental investigations;Industrial components;System failures