Investigations on high speed machining of EN-353 steel alloy under different machining environments

[摘要] The addition of Nano Particles into conventional cutting fluids enhances its cooling capabilities; in the present paper an attempt is made by adding nano sized particles into conventional cutting fluids. Taguchi Robust Design Methodology is employed in order to study the performance characteristics of different turning parameters i.e. cutting speed, feed rate, depth of cut and type of tool under different machining environments i.e. dry machining, machining with lubricant - SAE 40 and machining with mixture of nano sized particles of Boric acid and base fluid SAE 40. A series of turning operations were performed using L27(3)13orthogonal array, considering high cutting speeds and the other machining parameters to measure hardness. The results are compared among the different machining environments, and it is concluded that there is considerable improvement in the machining performance using lubricant SAE 40 and mixture of SAE 40 + boric acid compared with dry machining. The ANOVA suggests that the selected parameters and the interactions are significant and cutting speed has most significant effect on hardness.

[发布机构] Department of Mechanical Engineering, K L University, Vaddeswaram, Guntur, India^1

[效力级别] 机械制造

[关键词] Conventional cutting;High speed machining;Machining parameters;Machining performance;Nano-sized particles;Performance characteristics;Taguchi robust design;Turning operations