Geometrical and computer modeling of mechanical engineering surfaces products intersection line

[摘要] In the design and manufacture of engineering products geometrical problem is known by shaping the surface of the product. An important element of general solution of this problem is to define the lines of surfaces intersection, forming the shape of designed product. Existing possibilities of modern CAD systems do not allow achieving fullness of the result in this direction. For example, control points and change point of visibility is difficult to identify in the product drawings. In addition, there are no possibilities of detecting imaginary points which are necessary for a complete analysis of intersection surfaces, and mapping these points in the drawing. The aim of the study is to develop a geometric algorithm of constructive determining the intersection line and is devoid of these shortcomings. The objectives of the study are testing the obtained algorithm by experimental verification with geometric modeling solutions to specific problems by tools CAD. This study adopted the method, which is based on quotient of geometric sets, which are regarded as intersecting surfaces in space E3. One area of practical use of surface engineering products geometric algorithm - shaping is based on their intersection line.

[发布机构] Omsk State Technical University, Mira ave., 11, Omsk; 644050, Russia^1

[效力级别] 物理学 [学科分类] 力学，机械学

[关键词] Design and manufactures;Engineering products;Experimental verification;Geometric algorithm;Geometrical problems;Intersecting surfaces;Surface engineering;Surfaces intersections