Experimental investigations on the proximity effect bridge (a Josephson device) at zero voltage and at finite voltages in the µV range are reported.
The phase-super current relation at zero voltage was measured using an asymmetric superconducting quantuminterferormeter circuit. The data are in agreement with the Josephson supercurrent-phase relation I_S=I_C sinδ with deviation less than 5% of the critical current I_c. The supercurrent density in the measured bridges reached as high as 50-100 µA/µm^2.
Using microcircuitry techniques, proximity effect bridgeswere strongly coupled to superconducting microstrip resonators. Selfinduced steps in the I-V characteristics of bridges coupled to resonators were observed in the GHz region at voltages (frequencies) corresponding to the expected modes of the resonators. Two types of steps wereseen depending on whether the resonator impedance on resonance was much higher or much smaller than the bridge resistance. A simple two fluid model of the bridge-resonator circuit was developed and the size and shape of self-induced steps were calculated for a generalizedJosephson oscillator relation I_S = I_c(l-q + q sin∫ 2e/hV dt) where q = 1 corresponds to the original Josephson relation and q = 1/2 represents the phase slip regime. At low critical currents (I_c < 10 µA) and low voltages (V < 3µV) the size and shape of experimentally observedself-induced steps agree with the q = 1 model. At higher voltages and/or critical currents the step size increasingly deviates from the q = 1 model towards q = 1/2. These observations are interpreted to indicate a progressive reduction of the amplitude of the oscillatingJosephson supercurrent in proximity effect bridges from I_c towards I_c /2 as the critical current and/or voltage are increased.
