Venturi flow meter and Electrical Capacitance Probe in a horizontal two-phase flow

[摘要] The paper presents the results obtained with a spool piece (SP) made of a Venturi flow meter (VMF) and an Electrical Capacitance Probe (ECP) in stratified two-phase flow. The objective is to determine the relationship between the test measurements and the physical characteristics of the flow such as superficial velocities, density and void fraction. The outputs of the ECP are electrical signals proportional to the void fraction between the electrodes; the parameters measured by the VFM are the total and the irreversible pressure losses of the two- phase mixture. The fluids are air and demineralized water at ambient conditions. The flow rates are in the range of 0,065-0,099 kg/s for air and 0- 0,039 kg/s (0-140 l/h) for water. The flow patterns recognized during the experiments are stratified, dispersed and annular flow. The presence of the VFM plays an important role on the alteration of the flow pattern due to wall flow detachment phenomena. The signals of differential pressure of the VFM in horizontal configuration are strongly dependent on the superficial velocities and on the flow pattern because of a lower symmetry of the flow with respect to the vertical configuration.

[发布机构] Energy Department, Politecnico di Torino, Corso Duca degli Abruzzi, 24, 10129, Italy^1

[效力级别] 力学 [学科分类] 力学，机械学

[关键词] Ambient conditions;Demineralized water;Differential pressures;Electrical capacitance;Physical characteristics;Superficial velocity;Venturi flow meters;Vertical configurations