Design method of redundancy of brace-anchor sharing supporting based on cooperative deformation

[摘要] Because of the complicated environment requirement, the support form of foundation pit is diversified, and the brace-anchor sharing support is widely used. However, the research on the force deformation characteristics and the related aspects of the cooperative response of the brace-anchor sharing support is insufficient. The application of redundancy theory in structural engineering has been more mature, but there is little theoretical research on redundancy theory in underground engineering. Based on the idea of collaborative deformation, the paper calculates the ratio of the redundancy degree of the cooperative deformation by using the local reinforcement design method and the structural component redundancy parameter calculation formula based on Frangopol. Combined with the engineering case, through the calculation of the ratio of cooperative deformation redundancy in the joint of brace-anchor sharing support. This paper explores the optimal anchor distribution form under the condition of cooperative deformation, and through the analysis and research of displacement field and stress field, the results of the collaborative deformation are validated by comparing the field monitoring data. It provides theoretical basis for the design of this kind of foundation pit in the future.

[发布机构] School of Civil Engineering and Architecture, University of Jinan, Jinan; 250022, China^1;Eng. Technol. Res. Ctr. for Urban Underground Eng. Supporting and Risk Monitoring of Shandong Prov., Jinan; 250022, China^2;Geological Exploration Institute of Shandong Zhengyuan, Jinan; 250022, China^3

[效力级别] 生态环境科学

[关键词] Anchor distributions;Cooperative response;Field monitoring data;Local reinforcements;Parameter calculation;Structural component;Theoretical research;Underground engineering