Transverse Crack Modeling and Validation in Rotor Systems, Including Thermal Effects

[摘要] This article describes a model that allows the simulation of the static behavior of a transverse crack in a horizontal rotor under the action of weight and other possible static loads and the dynamic behavior of cracked rotating shaft. The crack breathes—that is, the mechanism of the crack's opening and closing is ruled by the stress on the cracked section exerted by the external loads. In a rotor, the stresses are time-dependent and have a period equal to the period of rotation; thus, the crack periodically breathes. An original, simplified model allows cracks of various shapes to be modeled and thermal stresses to be taken into account, as they may influence the opening and closing mechanism. The proposed method was validated by using two criteria. First the crack's breathing mechanism, simulated by the model, was compared with the results obtained by a nonlinear, threedimensional finite element model calculation, and a good agreement in the results was observed. Then the proposed model allowed the development of the equivalent cracked beam. The results of this model were compared with those obtained by the three-dimensional finite element model. Also in this case, there was a good agreement in the results.Therefore, the proposed models of the crack and the equivalent model of the beam can be inserted into the finite element model of the beam used for the rotor's dynamicbehavior simulation; the obtained equations have timedependent coefficients, but they can be integrated into the frequency domain by using the harmonic balance method.

[学科分类] 力学，机械学