Parametric Study of Greitzer's Instability Flow Model Through Compressor System Using the Taguchi Method

[摘要] The occurrence of stall and surge is caused by instability of the flow through the compressor system. These two phenomena often result in serious mechanical problems for the compressor. The scope of this article includes a review and parametric study on the characteristics of stall and surge and their mathematical modeling.In this article, Greitzer's B-parameter model is applied for analyzing the stall and surge characteristics. Based on this model, a total of four parameters—B,G,K, andLC—in the model are highlighted in order to establish the influence of each parameter on the system. ParametersB,G, andKare all dimensionless constants whileLCis the effective length of the compressor duct.Here, the governing equations of stall and surge behavior are solved numerically using fourth-order Runge-Kutta method. The Taguchi method is then used to analyze the resultsgenerated to obtain the extent of effects of the parameters on the system by varying the parameters in a series of combinations. Finally, a thorough analysis is carried out on the results generated from the Taguchi method and the graphs. It is found that parameterKis the deciding factor in the position of the cross point whereas parameterBis the most important one in changing the length of time needed for the compressor to reach its steady state.

[学科分类] 力学，机械学