Effect of inlet speed on gravitational air separator for cenospheres accumulation from fly ash: modeling using computational fluid dynamics (CFD)

[摘要] Dry gravity separation is widely used in industries due to its low operational cost. Furthermore, it does not require water to perform its separation process. Commonly used gravity separator is cyclone separator. Unfortunately, this type of separator is unable to yield various purities for its products. A modified gravity separator as an alternative relies on terminal velocity difference for different diameter and density is evaluated in this paper. The separated particles are coal fly ash and cenosphere which are the results of coal combustion where the content of cenosphere is generally 0.1% of total mass. Separated cenospehere can be used for various applications in the field of materials. In this simulation we use a particle model with a ratio of fly-ash to cenosphere mass of 1:1. Particles behavior in this gravity separator is affected by terminal velocity, linear speed, as well as rheology. Modeling with CFD (Computational Fluid Dynamics) using the Discrete Phase Model can take into account the behavior of particles that are affected by these factors. This model assumes that the simulated particles are perfectly round in shape. It uses the Euler-Lagrange framework in which the perfectly rounded particles (discrete phases, Lagrange frames) interact with air (continuous phase, Euler framework) and performed with ANSYS Fluent software. This study evaluates the effect of speed variation on Newton efficiency (NE) on a given geometry. Simulations were performed with variations of inlet velocity: 0.1 m/s; 0.25 m/s; 0.5 m/s; 1 m/s; 2 m/s; and 3 m/s. It was found that the lower the speed, the higher the NE and the optimum NE of 0.41 is obtained with 0.25 m/s inlet velocity.

[发布机构] Department of Chemical Enginering, Sustainable Mineral Processing Research Group, Faculty of Engineering, Universitas Gadjah Mada, Jl. Grafika No. 2, Yogyakarta; 5528, Indonesia^1

[效力级别] 矿业工程 [学科分类] 工业工程学

[关键词] CFD (computational fluid dynamics);Discrete phase model;Gravity separation;Gravity separator;Newton efficiency;Separation process;Speed variations;Terminal velocity