Development and characterization of a MnCu-based high damping alloy plate

[摘要] From the viewpoint of engineering application, the Mn-Cu based alloy plates are prepared to characterize both the mechanical properties as well as the damping capacity by employing the tensile test and dynamic mechanical analysis (DMA), respectively. The microstructure of MnCu alloy were determined by optical microscopy, while the tensile fracture morphology was observed by using a scanning electron microscopy. It is verified that the mechanical properties are similar to that of A3 steel while the vibration noise across the MnCu alloy plate cut about 5-15dB off during all the experiment frequency range from 20 to 300 Hz when the alloy backing plates are applied under a turbine electric generator. The internal friction characteristic of the alloy is disclosed to be dynamic hysteresis closely related to the vibration frequency, as well as to be static hysteresis that depending on strain amplitudes. With whatever vibration frequencies or strain amplitudes, the damping capacity (tan δ) of the alloy plate still shows satisfactory engineering application value higher than 0.02 at ambient temperature range around room temperature.

[发布机构] State Key Laboratory of Advanced Special Steels, Shanghai University, China^1;Research Institute for Equipment Materials, Hebei University of Technology, China^2

[效力级别] 机械制造

[关键词] Dynamic hysteresis;Dynamic mechanical analysis (DMA);Engineering applications;Frequency ranges;Friction characteristics;High damping alloys;Tensile fracture morphology;Vibration frequency