The Effect of Aluminum Content and Processing on the Tensile Behavior of High Pressure Die Cast Mg Alloys

[摘要] Due to their high specific strength and good castability, magnesium alloys are desirable for use in weight reduction strategies in automotive applications. However, the mechanical properties of high pressure die cast (HPDC) magnesium can be highly variable and dependent on location in the casting. To better understand the relationship between microstructure and tensile properties, the influence of alloying and section thickness on the microstructural features and tensile properties of Mg-Al and Mg-Al-Mn alloys is quantified.This investigation provides experimental input to modeling activities for the development of an Integrated Computational Materials Engineering capability, to assess and quantify the impact of microstructure on the tensile behavior of HPDC Mg AM series (magnesium-aluminum-manganese) alloys. As a result of this work, it is found that with increasing aluminum content, the yield strength increases and the ductility decreases. Increasing the plate thickness results in a decrease in both the yield strength and ductility. HPDC components have varying microstructural features through the plate thickness, developing a ;;skin” and ;;core”. The grain size, beta-Mg17Al12 phase, and solute content are all quantified through the thickness of the plates. By quantifying microstructural variations, a physics-based model has been developed which is able to predict the effects of alloying and plate thickness on yield strength. The primary factors affecting strengthening are accounted for using a linear superposition model of solid solution, grain size, and dispersion hardening. This model takes into account through-thickness microstructure gradients that exist in HPDC components by using a composite model to incorporate the skin and core changes. The yield strength in these alloys is dominated by grain boundary strengthening and solute hardening effects. In order to isolate the effects of eutectic phases, shrinkage porosity and oxide films on strength and ductility, HPDC plates were solution treated and processed by hot isostatic pressing. It is found that there is a hierarchical effect on ductility associated with these features - oxide films have the most deleterious effect, followed by shrinkage porosity and finally beta-phase volume fraction. By identifying the critical microstructural features, we can better predict and design for the desired properties during the manufacturing process.

[发布机构] University of Michigan

[效力级别] Mechanical properties

[关键词] Magnesium alloys;Mechanical properties;high pressure die casting;Materials Science and Engineering;Engineering;Science;Materials Science and Engineering