Development of a minimally invasive robotic surgical manipulator

[摘要] ENGLISH ABSTRACT: Minimal invasive surgery (MIS) enables surgeons to operate through a few small incisions made in the patient's body. Through these incisions, long rigid instruments are inserted into the body and manipulated to perform the necessary surgical tasks. Conventional instruments, however, are constrained by having only five degrees of freedom (DOF), as well as having scaled and mirrored movements, thereby limiting the surgeon's dexterity. Surgeons are also deprived of depth perception and hand-eye coordination due to only having two-dimensional visual feedback. Surgical robotics attempt to alleviate these drawbacks by increasing dexterity, eliminating the fulcrum effect and providing the surgeon with three-dimensional visualisation. This reduces the risks to the patient as well as to the surgeon. However, existing MIS systems are extremely expensive and bulky in operating rooms, preventing their more widespread adoption. In this thesis, a new, inexpensive seven-DOF primary slave manipulator (PSM) is presented. The four-DOF wrist is actuated through a tendon mechanism driven by five 12 VDC motors. A repeatability study on the wrist's joint position was done and showed a standard deviation of 0.38 degrees. A strength test was also done and demonstrated that the manipulator is able to resist a 10 N opposing tip force and is capable of a theoretical gripping force of 15 N.

[发布机构] Stellenbosch University