Single bubble-electrospinning of polyvinyl alcohol and polyacrylonitrile

[摘要] ENGLISH ABSTRACT: Needle-electrospinning is an uncomplicated and highly versatile nanofiber (fiber diameter of 50 to 500 nm) production technique. Nevertheless the process can only produce 0.01 to 1.0 g/h/m2 of nanofibers, unpractical for large-scale productions. Bubble-electrospinning, in the presence of surfactants, is a novel nanofiber mass-production technique developed at Stellenbosch University.[1] The technique is similar to needle-electrospinning only that the surface area of a bubble surpasses that of a solution droplet, making it possible for multiple jets to form on the bubble surface at high field strengths. Thus far little research has been done on the influence of solution properties on the bubble-electrospinning technique.During electrospinning the solution experiences three competing forces, namely, surface tension (contracting force), charge repulsion (expanding force), and viscosity (resistance to flow). The first aim of this study was to obtain better understanding on the influence of three significant solution properties (viscosity, conductivity and surface tension) on bubble-electrospinning in terms of bubble lifetime, bubble size, average number of jets and the resultant fibers. The solution properties were varied using a range of polymer and surfactant concentrations. A second aim was to obtain better understanding on the comparison of the bubble-electrospinning process between two polymer solutions, namely Polyvinyl alcohol (PVOH) solutions containing sodium lauryl ether sulphate (SLES) surfactant, and Polyacrylonitrile (PAN) solutions containing silicone surfactant.Results indicated that the solution viscosity and conductivity increased with increasing polymer concentrations for both polymer solutions. In addition, both the solution surface tensions were not influenced by polymer concentration. With regards to bubble-electrospinning of PVOH solutions, results indicated that the average number of jets per bubble was influenced by the polymer concentration. Regarding PAN solutions, bubble lifetime and the average number of jets was influenced by polymer concentration.Results indicated that the solution viscosity increased and surface tension decreased with increasing surfactant concentration for both polymer solutions. PVOH solution conductivity increased whilst PAN solution conductivity decreased with increasing surfactant concentrations. With regards to bubble-electrospinning of PVOH solutions, the bubble lifetime and bubble size was significantly influenced by the SLES concentration. Regarding PAN solutions, the silicone surfactant concentration had no significant effect on the bubble-electrospinning process. Overall, PVOH fiber diameters decreased with increasing surfactant concentration.There was no common trend between the bubble-electrospinning of PVOH and PAN solutions in relation to their solution properties. It was concluded that solution viscosity, conductivity and surface tension are not the only significant contributing parameters to the bubble-electrospinning process.

[发布机构] Stellenbosch University