Microstructures and properties of low-alloy fire resistant steel

[摘要] Microstructures and properties of weldable quality low-alloy fire resistant structural steels (YS: 287–415 MPa) and TMT rebar (YS: 624 MPa) have been investigated. The study showed that it is possible to obtain two-thirds of room temperature yield stress at 600°C with 0.20–0.25% Mo and 0.30–0.55% Cr in low carbon hot rolled structural steel. Microalloying the Cr–Mo steel by niobium or vanadium singly or in combination resulted in higher guaranteed elevated temperature yield stress (250–280 MPa). The final rolling temperature should be maintained above austenite recrystallization stop temperature (∼ 900° C) to minimize dislocation hardening. In a quenched and self-tempered 600 MPa class TMT reinforcement bar steel (YS: 624 MPa), low chromium (0.55%) addition produced the requisite yield stress at 600°C. The low-alloy fire resistant steel will have superior thermal conductivity up to 600°C (> 30 W/m.k) compared to more concentrated alloys.

[学科分类] 材料工程

[关键词] Fire resistant steel;thermomechanical processing;microstructure;strength;thermal conductivity.