Method of control position of laser focus during surfacing teeth of cutters

[摘要] Providing the quality laser of surfacing the edges of teeth requires control not only the energy of the radiation parameters, but also the position of the focal spot. The control channel of position of laser focus during surfacing, which determines the parameters of quality of the deposited layer, was calculated in the work. The parameters of the active opto-electronic system for the subsystem adjust the focus position relative to the deposited layer with a laser illumination of the cutting edges the teeth cutters were calculated, the model of a control channel based on thermal phenomena occurring in the zone of surfacing was proposed.

[发布机构] Kazan (Volga) Federal University (KFU), Naberezhnye Chelny, Russia^1;Research and Production Association ROSTAR, Naberezhnye Chelny, Russia^2

[效力级别] 机械制造

[关键词] Control channels;Deposited layer;Focus positions;Laser illumination;Parameters of quality;Position of laser;Radiation parameters;Thermal phenomena