Effects of material characteristics and clearance size on dynamics of a slider-crank mechanism with two sliders and revolute clearance joints

[摘要] This article presents influences of clearance size and material parameters on the dynamic response of a slider-crank mechanism with imperfect revolute joints in dry contacting condition. The mechanism was created by Solidworks and a finite element method in ANSYS software was used to analyze the effects which presented and discussed. The simulation results revealed that the acceleration of two sliders was obviously shaking with high peaks when the clearance size equal to 0.3 mm which differ from the ideal joint. Moreover, the smaller Young's modulus material of journals indicated the significant effects on acceleration of mechanical systems. The reasons are due to a suddenly increase of contact force when the journal impacted into the bearing in imperfect revolute joints. The simulation results for the clearance size equal to 0.1 mm, 0.2 mm and 0.4 mm were close to an ideal joint. It demonstrated that clearance size and material characteristic played an important role in dynamics analysis of mechanical systems.

[发布机构] Department of Mechanical Engineering, National Kaohsiung University of Applied Sciences, 415 Chien-Kung Road, Kaohsiung; 80778, Taiwan^1;Division of Computational Mechatronics, Institute for Computational Science, Ton Duc Thang University, Ho Chi Minh City, Viet Nam^2;Faculty of Electrical and Electronics and Engineering, Ton Duc Thang University, Ho Chi Minh City, Viet Nam^3

[效力级别] 物理学 [学科分类] 材料科学（综合）

[关键词] Dynamics analysis;Effects of materials;Material characteristics;Material parameter;Mechanical systems;Revolute clearance joints;Slider-crank mechanism;two sliders