Techno-Economic Study of CO2 Capture Process for Cement Plants

[摘要] Carbon dioxide is considered to be the major source of GHG responsible for global warming; man-made CO₂ contributes approximately 63.5% to all greenhouse gases. The cement industry is responsible for approximately 5% of global anthropogenic carbon dioxide emissions emitting nearly 900 kg of CO₂ for every 1000 kg of cement produced! Amine absorption processes in particular themonoethanolamine (MEA) based process, is considered to be a viable technology for capturing CO₂ from low-pressure flue gas streams because of its fast reaction rate with CO₂ and low cost of raw materials compared to other amines. However, MEA absorption process is associated with high capital and operating costs because a significant amount of energy is required for solvent regeneration and severe operating problems such as corrosion, solvent loss and solvent degradation.This research was motivated by the need to design size and cost analysis of CO₂ capture process from cement industry. MEA based absorption process was used as a potential technique to model CO₂ capture from cement plants. In this research four cases were considered all to reach a CO₂ purity of 98% i) the plant operates at the highest capacity ii) the plant operates at average load iii) the plant operates at minimum operating capacity and iv) switching to a lower carbon content fuel at average plant load. A comparison among four cases were performed to determine the best operating conditions for capturing CO₂ from cement plants. A sensitivity analysis of the economics to the lean loading and percent recovery were carried out as well as the different absorber and striper tray combinations.

[发布机构] University of Waterloo

[效力级别] CO2 capture

[关键词] Chemical Engineering;CO2 capture;MEA;Aspen Plus;Icarus;Cement Plant;Fuel switching;Cost